Independance Day
Posted: Wed Jul 04, 2012 7:31 pm
Unfortunately, Will Smith and Jeff Golblum could not be here for the unveiling of this guitar... 
Enjoy!
Enjoy!
Page 1 of 3
Re: Independance Day
Posted: Wed Jul 04, 2012 8:21 pm
Real NICE and very patriotic!
Re: Independance Day
Posted: Wed Jul 04, 2012 10:12 pm
Nice guitar! Very "Buck Owens-ish" and totally appropriate for the 4th!
But I must ask, what do the push buttons below the knobs do?
But I must ask, what do the push buttons below the knobs do?
Re: Independance Day
Posted: Thu Jul 05, 2012 6:59 am
wow...it should come with fireworks.
Re: Independance Day
Posted: Thu Jul 05, 2012 12:16 pm
Very nicely done!!
Re: Independance Day
Posted: Thu Jul 05, 2012 12:38 pm
Happy 4th! Very patriotic! I see your using our Hallmark roller bridge. Thanks!
Bob
Bob
Re: Independance Day
Posted: Thu Jul 05, 2012 1:02 pm
Bob Shade wrote: I see your using our Hallmark roller bridge. Thanks!
Bob
I seriously doubt that bridge is a Hallmark judging by the more squared edges and non acorn nuts on the adjustment screws. It looks more like the generic bridge offered by various internet vendors. In the following photo you can see the Hallmark on the right and generic on the left.
Here's one on eBay.
http://www.ebay.com/itm/OLD-STYLE-ROLLE ... 5d305d56b2
Re: Independance Day
Posted: Thu Jul 05, 2012 1:34 pm
Hey Danny, when I re-designed the Hallmark roller bridge in early 2000, I decided to take out the issues of the vintage Mosrite and Hallmark bridges and make it perform better. The first thing I did was to rid of the folded sheet metal bridge deck and make it out of a solid milled block of brass stock instead.
The next thing I wanted was better bridge saddles that served two purposes. First, the string radius should be perfect to Hallmark radius and the rollers should be uniform in height unlike vintage Mosrite rollers. So I decided to make the saddles control the radius rather than the rollers themselves. So I developed 3 different size roller housings rather than 3 different size slots in the rollers themselves, for better performance.
When I developed this bridge it went through several stages of re-design until I was happy with it. So you will see on our first Hallmarks the first version of the bridge, and the second and third run the second version, and fourth run the third version etc.
The company that is making our bridges for us saw an opportunity and wanted to offer our bridge to other vendors, so we came to an agreement for a lisc. for our design and some slight cosmetic changes were made so we retain the look of the classic Hallmark bridge. Other than that they are the same design performance wise.
Bob
The next thing I wanted was better bridge saddles that served two purposes. First, the string radius should be perfect to Hallmark radius and the rollers should be uniform in height unlike vintage Mosrite rollers. So I decided to make the saddles control the radius rather than the rollers themselves. So I developed 3 different size roller housings rather than 3 different size slots in the rollers themselves, for better performance.
When I developed this bridge it went through several stages of re-design until I was happy with it. So you will see on our first Hallmarks the first version of the bridge, and the second and third run the second version, and fourth run the third version etc.
The company that is making our bridges for us saw an opportunity and wanted to offer our bridge to other vendors, so we came to an agreement for a lisc. for our design and some slight cosmetic changes were made so we retain the look of the classic Hallmark bridge. Other than that they are the same design performance wise.
Bob
Re: Independance Day
Posted: Thu Jul 05, 2012 1:36 pm
How sweet it turned out! 
Re: Independance Day
Posted: Thu Jul 05, 2012 1:46 pm
Thanks Veenture!
You would know, you have one.
BTW, you guys are fantastic, I still tell people about your band and to check you out on youtube!
Bob
You would know, you have one.
BTW, you guys are fantastic, I still tell people about your band and to check you out on youtube!
Bob